The most likely culprit is that the Acoustica Noise Reduction is on and has a bad noise print. The software uses a noise print to remove or subtract noise from the music. In order to work properly, it...
Spin It Again can burn CDs using three different burning engines: Primo, Goldenhawk and IMAPI. Primo is the preferred burning engine because it's the newest and it supports the most CD drives. In Spin...
Instead of entering the track name on the Preview and Edit Your Recording screen, click on the Edit Album Info button at the top of the screen and enter the track information there....
In Spin It Again, click on Settings and select the Audio settings. Try doubling the number of buffers (from 8 to 16) and doubling the buffer size (from 16384 to 32768). Click OK to save those settings...
1. Make sure that you've hooked up your record or cassette tape player properly. Run the Hookup Wizard! 2. Make sure to set the correct recording source and adjust the level. Run the Recording Level W...
Some laptop soundcards don't have a Line In connector. If your sound card doesn't have a Line In connector, you might consider getting a USB soundcard that has Line In and connects to your laptops USB...
There are many CD recorders, computer configurations, blank CD models, and reasons for burn failures. Here are some things for you to try. 1. Do a test burn! Make sure to click Test Mode on the CD Bur...
After recording, the Preview & Edit Screen comes up and, by default, automatically chops the recording up into multiple tracks, if possible. If the tracks are not being recognized properly, it could b...
This may be due to Spin It Again's automatic track detection feature. If you are using the automatic track detection, it's important to preview the beginning and ending of each song to make sure that ...
The full error is The Wave Input device cannot open. Another program may be using it. Close the other program and try again. If you have more than one soundcard, you may try an alternative device to r...